Products for Wheelabrator Facilities

Home
Products for Wheelabrator Facilities

Hydraulic Grate & Specialty Cylinders

Grate, feeder, flap gate and specialty hydraulic cylinders built to Wheelabrator and Von Roll drawings, including Mecman interchange builds.

Grate Cylinders – 4 parts

4″ bore, double rod end grate cylinders with a 2″ hollow rod and 5.90″ stroke, built to the Von Roll grate design.

B/M-366-10

3D-74-10 4″ Bore Grate Cylinder

Bore: 4"
Rod: 2" hollow
Stroke: 5.90"
Mount: Double end

Mecman interchange

Full specification (7)

Double rod end
C-118-1CH 2″ hollow rod
5.90″ stroke
Viton aerospace seals
3/8 NPT ports pos #1
Standard black paint
Mecman interchange

Application: Cylinder mounting bracket for grates (new)
Wheelabrator P/N: 01159ME471Note: facility dependent

B/M-1015

4″ Bore NFPA Grate Cylinder

Bore: 4"
Rod: 2" hollow
Stroke: 5.90"
Mount: Double end

NFPA 2610–2900 PSI

Full specification (7)

Double rod end
C-118-1CHM/F 2″ hollow rod
5.90″ stroke
Viton/aerospace seals
3/8 NPT ports pos #1 both ends
Operating pressure: 2610–2900 PSI
Black paint

Application: —
Wheelabrator P/N: Not assigned

B/M-366-20

4″ Bore Grate Cylinder

Bore: 4"
Rod: 2" hollow
Stroke: 5.90"
Mount: Double end

Von Roll Mecman interchange

Full specification (9)

Double rod end
C-118-1CH 2″ hollow rod
5.90″ stroke
Viton/carbon graphite seals
3/8 NPT ports pos #1
Von Roll #2600 D 033.02 Rev. A
Operating pressure: 2610–2900 PSI
Standard black paint
Mecman interchange

Application: Grate hydraulic cylinder
Wheelabrator P/N: 01159ME500Note: facility dependent

BM-366-20-P2

4″ Bore Grate Cylinder

Bore: 4"
Rod: 2" hollow
Stroke: 5.90"
Mount: Double end

Von Roll Mecman interchange Gloucester only

Full specification (11)

Double rod end
C-118-1CH 2″ hollow rod
5.90″ stroke
Viton/carbon graphite seals
3/8 NPT ports pos #2
Von Roll #2600 D 033.02 Rev. A
Operating pressure: 2610–2900 PSI
Paint per customer specs: primer white
(2) red identification dots
Mecman interchange
Gloucester facility only

Application: —
Wheelabrator P/N: Not assigned

Feeder & Flap Gate Cylinders – 4 parts

Von Roll ram feeder and flap gate cylinders with spherical mounts, Viton seals and SAE flanged manifolds.

B/M-367-2

4″ Bore Hydraulic Flap Gate Cylinder

Bore: 4"
Rod: 3"
Stroke: 34"
Mount: Spherical

Von Roll Protective shroud

Full specification (9)

B-612 3″ dia piston rod
34″ stroke
Protective shroud
#8M spherical mount with spherical rod eye
Non-cushioned
Viton seals
SAE flanged manifold assembly
Von Roll No. 2600 D 031.01 Rev. 1
Ref. drawing 3D-75-2

Application: —
Wheelabrator P/N: Not assigned

B/M-370-24

4″ Bore Ram Feeder Cylinder

Bore: 4"
Rod: 2-3/4"
Stroke: 35-1/2"
Mount: #12 rear trunnion

Temposonic probe

Full specification (8)

B-628 2-3/4″ dia piston rod
35-1/2″ stroke
Temposonic probe
#12 rear trunnion mount
50 mm spherical rod eye
Viton seals
Manifold tubes and G1/2 ports
Ref. drawings 3D-76-24 & 3D-76-24PL

Application: —
Wheelabrator P/N: Not assigned

B/M-1549

5″ Bore Flap Gate Cylinder

Bore: 5"
Rod: 3" chrome
Stroke: 31-1/2"
Mount: Spherical

Von Roll 2610–2900 PSI

Full specification (7)

B-612-10 3″ heavy chrome rod
31-1/2″ stroke
#8S spherical mount & spherical rod eye
Operating pressure: 2610–2900 PSI
Protective shroud & SAE flange manifold assembly
Von Roll #2009D011 Rev. A
Ref. drawing 3D-212

Application: —
Wheelabrator P/N: Not assigned

B/M-370-2

4″ Bore Feeder Cylinder

Bore: 4"
Rod: 2.75" male
Stroke: 35-1/2"
Mount: Spherical

Von Roll Temposonic probe

Full specification (9)

B-628-1 2.75″ male rod
35-1/2″ stroke
Temposonic probe
#8M spherical mount with spherical rod eye
Non-cushioned
Viton seals
B-737-10 SAE flanged manifold assembly
Von Roll No. 2600 D 033.03 Rev. A
Ref. drawing 3D-76-2

Application: —
Wheelabrator P/N: Not assigned

Specialty Hydraulic Cylinders – 9 parts

Mill type, high pressure, JHDH and Mecman upgrade builds for ash expellers, gates and other plant equipment.

B/M-833-2

Cylinder – Special End

Bore: —
Rod: 1"
Stroke: 4-1/2"
Mount: #8M rear pivot

Ball joint rod end

Full specification (11)

B-029-833-2 1″ piston rod
4-1/2″ stroke – spec end
KK = 3/4-16 (male)
A = 15/16″ (long)
W = 2-5/16″
LA = 3-1/4″
Non-cushioned
Special #8M rear male pivot mount
Counterbored Allen-nut tie rod nuts cap end
1/2 NPTF ports pos #1 bushed to 3/8 NPT
Sold with bushing and ball joint rod end

Application: —
Wheelabrator P/N: Not assigned

B/M-1055-3

3.03″ Bore Mill Type Hydraulic Cylinder

Bore: 3.03"
Rod: 1-3/4"
Stroke: 31"
Mount: 8S spherical

High-temp Viton

Full specification (12)

B-1211-3 1-3/4″ dia piston rod
KK = 1-1/4-12
A = 1.50
31″ stroke
Non-cushioned
Style 8S spherical mount
CD = 1-3/8
46-7/8 pin to pin
With spherical rod eye
Ports SAE #12
Outward facing Poly-Pak for wiper
Viton high temp seals

Application: Cylinder for ash expeller swing gate
Wheelabrator P/N: 16450GA001Note: facility dependent

B/M-2194

HP60 6″ Bore HP Hydraulic Cylinder

Bore: 6"
Rod: 3"
Stroke: 28-1/8"
Mount: MT4 trunnion

HP60 Max 180°F

Model X6012812AN148

Full specification (18)

B-577-2194 3″ dia piston rod
28-1/8″ stroke – type A end
KK = 2-1/4-12 (male)
A = 3″ (long)
WF = 2-1/8″
Non-cushioned
#14 (MT4) intermediate trunnion mount, XI = 16-17/32
Trunnion mount friction welded or single piece construction
Round bearing retainer
SAE-16 port pos #1 rod end
Special 2-bolt port pos #1 cap end
GT cap piston seal with (2) wearbands
Polyurethane rod seal and O-rings (max temp 180°F)
Recessed tie rod nuts cap end
(2) 1/4-20 tapped holes pos #4 cap end
No provision for position transducer
Grub screw piston to rod per B-1360
Ref. drawing 2D-712

Application: —
Wheelabrator P/N: Not assigned

B/M-2259-10

3-1/4″ Bore HP Hydraulic Cylinder

Bore: 3-1/4"
Rod: 2"
Stroke: 25-5/8"
Mount: Rear spherical

Metric rod end

Full specification (13)

B-1855-10 2″ dia piston rod
25-5/8″ stroke
Metric male rod end, KK = M35 x 1.5
A = 2.20″ (long)
W = 3-1/2″
Special rear spherical pivot mount
G3/4 port pos #1 open head
G1/2 port pos #2 closed head
Non-cushioned
Viton seals & Teflon back-ups
Metallic rod scraper
Ref. drawing 2D-956-10
Sold with rod eye

Application: —
Wheelabrator P/N: Not assigned

H40S0800AN13RP

JHDH40 4″ Bore Hydraulic Cylinder

Bore: 4"
Rod: 1"
Stroke: 8"
Mount: #13 trunnion

BeCu scraper

Full specification (7)

B-029/B 1″ piston rod
Stroke – 8.00 in.
End type – A
Non-cushioned
#13 welded trunnion mount
BeCu scraper
Viton seals

Application: —
Wheelabrator P/N: Not assigned

H40S0800AN13Y

JHDH40 4″ Bore Hydraulic Cylinder

Bore: 4"
Rod: 1"
Stroke: 8"
Mount: #13 trunnion

Rod stud

Full specification (6)

B-029/B 1″ piston rod
Stroke – 8.00 in.
End type – A
Non-cushioned
#13 welded trunnion mount
With rod stud

Application: —
Wheelabrator P/N: Not assigned

B/M-1302-3

154 mm Bore Mecman Interchange Upgrade

Bore: 154 mm
Rod: 3"
Stroke: 900 mm
Mount: #14 trunnion

Mecman interchange Metric

Full specification (9)

Lehigh Mecman interchange upgrade
3″ dia piston rod
900 mm stroke
Metric female rod end
Non-cushioned
#14 center trunnion mount
1″ BSPP ports pos #1
(4) bolt mount pos #4 cap end
Ref. drawing 3D-128-BR

Application: —
Wheelabrator P/N: Not assigned

B/M-1566

HP70 7″ Bore HP Hydraulic Cylinder

Bore: 7"
Rod: 4"
Stroke: 29-1/8"
Mount: #8F clevis

HP70

Full specification (7)

B-734-1566 4″ dia piston rod
29-1/8″ stroke
Studded male rod end
#8F (MP1) fixed clevis cap end mount with pin
SAE-20 ports pos #1
Non-cushioned
Ref. drawing 2D-815

Application: —
Wheelabrator P/N: Not assigned

B/M-919-1

HP 8″ Bore Ash Expeller Cylinder

Bore: 8"
Rod: 5-1/2"
Stroke: 32"
Mount: #8M spherical

30″ actual stroke Protective rod boot

Full specification (10)

5-1/2″ dia piston rod
32″ stroke (30″ actual)
2″ internal stop collar
Non-cushioned
Male rod end
#8M spherical mount
SAE #20 ports pos #1
1/8″ NPT gland drain pos #1
Poly seals with back-ups
Protective rod boot

Application: —
Wheelabrator P/N: Not assigned

Air Cylinders

Pneumatic cylinders supplied as complete assemblies with 120 VAC double solenoid 5/2 valves.

B/M-1015-20

4″ Bore Air Cylinder

B-029-1-B-N/C 1-3/8″ piston rod
10″ stroke
Type B female rod end
#6 (MF1) rectangular front flange mount
1/2 NPT ports pos #4
Non-cushioned
Assembled with 120 VAC double solenoid 5/2 valve with manual override
Exhaust speed control mufflers pos #1
Ref. drawing 2D-1009

B/M-2451

3-1/4″ Bore Air Cylinder

B-029-1-B-N/C 1-3/8″ rod
8″ stroke
Type B female rod end
1/2 NPT ports pos #4
Non-cushioned
Assembled with 120 VAC double solenoid 5/2 valve with manual override
Exhaust speed control mufflers pos #1
Ref. drawing 2D-1008

B/M-2452

4″ Bore Air Cylinder

B-029-1-B-N/C 1-3/8″ piston rod
10″ stroke
Type B female rod end
#6 (MF1) rectangular front flange mount
1/2 NPT ports pos #4
Non-cushioned
Assembled with 120 VAC double solenoid 5/2 valve with manual override
Exhaust speed control mufflers pos #1
Ref. drawing 2D-1009

Hopper Wall Stuffing Boxes

First and third generation hopper wall seals for grate cylinder extension rods.

B/M-801

3D-120 Stuffing Box Assembly

First generation stuffing box assembly for 50 mm or 2″ extension rods. Hopper wall seal.

Application: Hopper wall

B/M-1644-100

Floating Hopper Wall Seal

Third generation floating hopper wall seal assembly for the Wheelabrator grate system, used with a 50 mm or 2.00″ extension rod.

Application: Packing box, grate cylinder hopper seal
Wheelabrator P/N: 01159ME026Note: facility dependent

Ref. drawing 2D-505-100

Mounting Hardware & Grate Assemblies

Brackets, trunnions, pillow blocks and the universal grate cylinder assembly.

B-938-20ALFP

Mounting Bracket Set

Mounting bracket set for the grate cylinder.

Application: Grate cylinder mount
Wheelabrator P/N: 01159ME504Note: facility dependent

(2) B-938-21 cap
(2) B-938-22 bracket
(4) 31 x 13 bolts
(4) 41 x 16 nuts
(4) 52 x 7 washers
(1) B-940-11 trunnion adaptor
(2) B-939 trunnion bearing

B-939

Trunnion Bearing

Trunnion bushing for the grate cylinder mount.

Application: Grate cylinder mount
Wheelabrator P/N: 01159ME503Note: facility dependent

B-940-11

NFPA Trunnion Adapter

B-940 NFPA trunnion adapter.

Application: Grate cylinder mount

VR43501

4″ VR Pillow Block

B-129 4″ pillow block mount.

Application: Grate cylinder mount
Wheelabrator P/N: 01159ME505 / 01159ME016 / 01159ME070Note: facility dependent

B/M-371

Grate Cylinder Universal Assembly

Universal grate cylinder assembly built per drawing B-128.

Application: Universal grates
Wheelabrator P/N: 01159ME597 / 01159ME587Note: facility dependent

Ref. B/M-366

Repair Kits, Rods & Components

Replacement kits, piston rods, tie rods, seals and switches for existing equipment.

K1133V/B

RPK-1133 Viton Repair Kit

Application: Flap gate arch cylinder repair kit
Wheelabrator P/N: 01156EI017Note: facility dependent

Less bearing

KBM-366-2/B

Von Roll Grate Cylinder Kit

RPK366-2/B less bearing
Carbon graphite

C-118-1CHF

2″ VR Case Female Rod per B/P

Application: 2" female piston rod
Wheelabrator P/N: 01156ME022Note: facility dependent

OAL: 13.31″

C-118-1CHM

2″ VR Case Male Rod per B/P

Application: 2" male piston rod
Wheelabrator P/N: 01156ME021Note: facility dependent

OAL: 18.50″

VR41801-5.9

5/8″ Dia. Von Roll Tie Rod

Application: Tie rod for B/M-366-20
Wheelabrator P/N: RT054715-01Note: facility dependent

5.90″ stroke
TRL – 19.75″
4-1/4 & 3-1/2
(M16 x 2)

VR43601

B-127 Adapter Plate

Application: Adapter plate for grate cylinder
Wheelabrator P/N: 111612Note: facility dependent

A-2608

Sealing Boot

721-000-004

Reed Switch

Reed switch for the FAC slide gate cylinder.

Application: Slide gate cylinder
Wheelabrator P/N: 16453ME552Note: facility dependent

Cylinder Specifications

Standard builds on file. Each is built to the listed drawing and seal specification.

Need Help?

Don't see what you need? Contact us today for additional assistance.

Contact

Lehigh Product Configurator & 2D/3D CAD Download System

Build a Complete Lehigh part number by specifying your requirements. When complete, receive the 3D and/or 2D CAD file in the file format of your choice.

configure